Do I Need to Uninstall Unity Before Installing Again

Unity Uninstall

Contents

Overview . 1

Requirements/Special Notes . 2

Installation and Execution . two

Removal Details . ii

Uninstalling With Failover 2

Option to skip removing subscriber information from mail users in directory . 3

Removing Location Objects Manually . 3

For Substitution 5.5 . 3

For Substitution 2000 . iii

Removing TSP and WAV drivers manually . three

Cisco . 3

Dialogic . 3

To decide the current setting for the Dialogic repose parameter 3

To remove Dialogic software – Windows NT 4.0 . three

To remove Dialogic software – Windows 2000 . 4

To remove Voice Technologies Group software . 4

NMS . 5

Choosing a Language Interface . 5

Obtaining Updates . 5

Revision History . 5

Overvie due west

The Unity Uninstall  Utility will remove all Unity related files, registry settings and most directory items in Exchange/Agile Directory from y'all system.  Y'all will demand to manually remove 3 accounts and 3 distribution lists from your arrangement after uninstalling earlier your system is make clean. Subsequently that, you should exist able to install a make clean version of Unity after doing that and rebooting your server.

Requirements/Special Notes

This version of Uninstall simply works with Unity 3.0(1) and later and four.0(1) and after. There is a separate version for the two.x uninstallation.

This tool does Non remove Dialogic, NMS or Cisco TSPs or WAV drivers.  Earlier running the Unity Uninstall utility you lot should Manually remove these items.  Run into "Removing TSP and WAV drivers manually" beneath for more than details on that process.  It as well does not remove Agile Fax if installed.  See "Removing Active Fax manually" beneath for more on that process.

If you are uninstalling a Unity server that is part of a failover configuration, meet the "Uninstalling with Failover" section beneath.

This version of Uninstall will remove objects from the directory that were added by setup for Unity 4.0(3) and later. For versions of Unity earlier than that it volition leave all objects in the directory and provides a list of objects that need to be removed manually for a complete uninstall. See the Removal Details section below for more.

Installation and Execution

To install and run the Uninstall utility you must be logged in as the business relationship that installed Unity.  Admission to the directory for removing objects will non exist possible if y'all're logged in as another administrator account. Simply run Setup.exe, no reboot is necessary.

When yous run the Uninstal Utility y'all will be warned several times earlier being allowed to actually proceed.  You tin can NOT undo this operation.  One time the uninstall starts your Unity system will be inoperable and a reinstall will be required.  Proceed with caution.

Exist sure to follow the instructions at the stop of the install. You volition need to manually remove a few accounts and distribution lists by hand (these volition exist listed for you at the end of the uninstall) and sometimes the Unity install directory does not get fully removed and you demand to remove information technology manually after a reboot (you'll exist warned of this at the end of the uninstall every bit well).

Removal Details

 The Uninstall utility takes the following steps:

1. All Unity subscribers associated with the Unity server the tool is run on take their Unity specific data removed from them.  This doesn't have any affect on their normal postal service user properties in Exchange, only the Unity specific extensions are removed.  High level items that are non Unity specific such as the recorded voice name are left in tact.  Only Subscribers associated with the local Unity server will have their Unity specific backdrop removed then if you have multiple Unity servers installed into the same Exchange site, the uninstall should not affect users associated with the other systems.
2. The example administrator, example subscriber and Unity messaging system accounts created by the Unity setup are removed from the directory for Unity 4.0(3) and later on. For earlier versions of Unity the accounts that need to be removed are presented on a dialog box at the end of the uninstall process.
3. All location objects associated with the local Unity server are removed from the directory entirely for Unity 4.0(iii) and later. For earlier versions of Unity a dialog box is presented at the end of the uninstall detailing with location objects should be removed.
4. The public distribution lists that were added to the system by the Unity setup are removed from the directory entirely for Unity 4.0(3) and subsequently. For before versions of Unity a dialog box is presented at the end of the uninstall detailing which distribution lists should be removed.
5. The Unity database information is removed from SQL. This includes all phone call handlers, COS definitions, interview handlers, restriction tables etc…
6. All Unity specific services are stopped and then removed from the Service Control Manager.
7. All Unity related registry settings are removed.
8. The Commserver directory and all it'southward subdirectories are removed from the hard drive. If some process has a handle open to a file under this directory the entire directory tree may not exist removed – if this happens a alert dialog is displayed at the end of the uninstall process that tells you to manually remove the directory later on a reboot.
9. The Unity program group is removed.
10. The links to the SA, Status monitor and the "part 2 setup" link are removed from the desktop.
11. The Tray condition application is removed from the startup group.
12. All the Unity specific web information for the SA, AA and Condition Monitor sites is removed from the wwwroot directory.
13. Several Unity specific DLLs are removed from the WinNT\System32 directory.

Notation: The automatic removal of accounts and distribution lists noted in a higher place but happens for Unity 4.0(three) and subsequently. For versions of Unity prior to that, when the uninstall completes you lot demand to delete the post-obit accounts by hand, either in Active Directory or in Exchange 5.five depending on what your back end is:

• Example Administrator
• Example Subscriber
• Unity_<machine name>
• UAMIS (if the AMIS feature is installed)
• "All Subscribers" distribution list
• "Organization Result Messages" distribution listing
• "Unaddressed Letters" distribution list

Annotation: The Unity folder is not removed by the Uninstall utility. It's not necessary to remove it, but if y'all feel the demand follow the instructions in the "removing location objects manually" below.

As noted above, the Uninstall utility does not remove whatsoever TSP or WAV drivers that may be installed.  Yous will want to remove Dialogic, NMS and/or Cisco TSP and WAV drivers manually earlier running the Uninstall utility. Since some of the Dialogic driver information is stored under the \commserver directory if you don't' do this earlier you lot Uninstall Unity it tin can exist a existent headache to remove properly afterward. Warning dialogs with this information are presented to the user at the beginning of the uninstall process.

Uninstalling With Failover

If y'all are uninstalling a Unity server that is the primary box in a failover configuration you first need to disconnect the servers from each other and terminate SQL replication between the boxes. The details for handling this are covered in the Failover guide in the "Uninstalling Failover on a Cisco Unity System" chapter. This document tin can be found online at:

http://www.cisco.com/univercd/cc/td/doc/product/vocalisation/c_unity/unity31/fail/fail31/fog_300.htm

If yous run the uninstallation tool without get-go doing this, the failover will fail and y'all will have to clean upward your arrangement manually. If the Uninstall sees that the local organisation is the primary server in a failover configuration, it will warn you lot of that fact and give you the opportunity to exit the uninstall process and complete these steps.

Pick to skip removing subscriber data from mail users in directory

If y'all're uninstalling a fail over server or you've manually removed the "Unity" folder from Exchange or reinstalled Commutation or for whatever reason want the uninstall utility to skip removing all Exchange objects and subscriber information, uncheck the "Remove subscriber information from postal service users in directory" checkbox in the "options" section. This volition cause the installer to skip steps 1 and 2 under the Removal Details section above.

This tin exist handy if y'all've reinstalled Substitution but forgot to remove Unity get-go and y'all want to clean up all the Unity specific files on your hard drive and in the registry before installing a new version of Unity. This is required if you're uninstalling a neglect over server since you don't want to remove the subscriber information in that case or the master server will exist render useless.

Removing Location Objects Manually

While it's not necessary to do so, y'all can remove the location objects manually. NOTE: Merely to be clear, it is NOT necessary to remove the Unity folder or delete the location objects to install Unity clean on the system. If, yet, you want to remove the binder added by Unity, you may do so. For Unity 4.0(3) and later the local location objects are deleted from the directory automatically, for versions of Unity prior to that they are left in the directory.

Alert: If there are other Unity servers installed in the directory, Do Non remove any location objects, simply leave them in that location. You run the take a chance of removing the incorrect location object (one associated with another Unity server) which volition render the other Unity server(due south) inoperable.

For Exchange 5.five

You must open the Commutation Administrator in "raw" manner. You tin do this by running the admin tool (ADMIN.EXE in the \Exchsrvr\bin directory) with the "-r" command line parameter. When the Exchange admin program comes up, select the Unity folder and then select "Edit | Delete Raw Object". You lot'll exist asked to confirm and then the folder will be removed. Removing this folder volition remove all location objects under it (in that location are non other objects stored hither in Unity 3.0)

NOTE: It's not generally a good idea to open the Exchange administrator in raw style all the time… sooner or after yous'll accidentally delete something you shouldn't. Raw fashion is very dangerous and will let you wax your entire Exchange site in one shot if you lot're not conscientious. Proceed with farthermost caution.

For Substitution 2000

Open up the "Active Directory Users and Computers" applet. Under the "View" menu, select the "Advanced Features" choice, this will force the "Unity" binder to be visible under the domain proper noun in the left console. Select the "Unity" binder and delete information technology. Again, make absolutely sure there are no other Unity servers installed in the directory or y'all volition render them inoperable, proceed with extreme caution.

Removing TSP and WAV drivers manually

Cisco

The AvCiscoTSP and WAV drivers will be automatically removed by the Uninstall utility.

Dialogic

To decide the electric current setting for the Dialogic repose parameter

When the Dialogic quiet parameter has been set to a value other than the default, the setting will exist lost when you remove the Dialogic software. Write down the current value of the repose parameter so you can restore that value after you lot reinstall the software.

· Shut downward Unity if information technology is running.

· On the Windows First menu, click Programs > Dialogic System Software > Dialogic Configuration Manager to start the DCM. The tree-structured list contains an entry for each Dialogic board installed in the server.

· On the Service menu, click "End service."

· Double-click any phonation board in the tree listing. The Properties dialog box for the board appears.

· Click the Misc tab.

· Under "Parameter," annotation and write down the value of "ParameterFile."

· Click "OK."

To remove Dialogic software – Windows NT iv.0

· Shut down Unity if information technology is running.

· On the Windows Starting time menu, click Programs > Dialogic System Software > Dialogic Configuration Manager–DCM.

· On the Service card, click "Stop service."

· Shut the DCM.

· On the Windows Starting time card, click Settings > Control Panel.

· Double-click "Telephony." The Dialing Properties dialog box appears.

· Click the Telephony Drivers tab.

· Click "Dialogic generation 2 service provider for NT." If you are using D/160SC voice boards and VoiceBridge 2000 feature-set up boards, this option will say "DSE Service provider."

· Click "Remove."

· Click "Close" to close the Dialing Properties dialog box.

· In Control Panel, double-click "Multimedia." The Multimedia Backdrop dialog box appears.

· Click the Devices tab. Expand "Audio devices."

· Click "Audio for Dialogic Wave Driver 1.x" or "Sound for dlgwave.dll."

· Click "Remove."

· When prompted to restart, click "Don't restart now."

· Click "OK" to close the Multimedia Backdrop dialog box.

· Close Control Console.

· On the Windows Offset menu, click Programs > Dialogic Sys-tem Software > Uninstall. Follow the on-screen instructions for the Dialogic software uninstall.

· When the dialog box asks whether you want to delete shared files, click "No to all.".

· Do not restart when it asks.

· If yous are using D/160SC vocalisation boards and VoiceBridge 2000 feature-gear up boards skip to the next procedure, "To remove Vocalization Technologies Group software."

· In that location is no need to reboot here… once yous're done uninstalling the Dialogic software, go on with running the Unity Uninstall utility.

To remove Dialogic software – Windows 2000

· Close down Unity if it is running.

· On the Windows Get-go menu, click Programs > Dialogic System Software > Dialogic Configuration Managing director–DCM.

· On the Service menu, click "Stop service."

· Shut the DCM.

· On the Windows Start menu, click Settings > Control Console.

· Double-click "Phone & Modem." The Telephone And Modem Options dialog box appears

· Click the Avant-garde tab.

· Click "Dialogic generation ii service provider for NT." If yous are using D/160SC vocalisation boards and VoiceBridge 2000 feature-set boards, this option will say "DSE Service provider."

· Click "Remove."

· Click "Shut" to close the Dialing Properties dialog box.

· In Control Panel, double-click "Sounds and Multimedia." The Sounds and Multimedia Backdrop dialog box appears.

· Click the Hardware tab, nether Devices double click on "Legacy Audio Drivers". The Legacy Audio Drivers Properties dialog box appears.

· Click the Properties tab. Expand "Audio devices"

· Click "Audio for Dialogic Wave Commuter 1.10" or "Audio for dlgwave.dll."

· Click "Remove."

· When prompted to restart, click "Don't restart now."

· Click "OK" to shut the Sounds and Multimedia Properties dialog box

· Close Control Console.

· On the Windows Start menu, click Programs > Dialogic System Software > Uninstall. Follow the on-screen instructions for the Dialogic software uninstall.

· When the dialog box asks whether yous want to delete shared files, click "No to all.".

· Do not restart when information technology asks.

· If you are using D/160SC voice boards and VoiceBridge 2000 characteristic-gear up boards skip to the side by side procedure, "To remove Voice Technologies Group software."

· There is no need to reboot hither… once you're washed uninstalling the Dialogic software, proceed with running the Unity Uninstall utility.

Exercise the post-obit procedure if the Unity server contains Dialogic D/160SC vocalization boards and Voice Technologies Group Voice-Bridge 2000 feature-set boards.

To remove Vocalisation Technologies Group software

· On the Windows Get-go menu, click Settings > Control Panel > Add/Remove Programs.

· Remove "VoiceBridge 2000."

· When the dialog box asks whether y'all want to delete shared files, click "No to all."

• Close the Add/Remove Programs dialog box.

NMS

· Shut down Unity if it is running.

· On the Windows Start card, click Settings > Control Panel.

· Double-click "Telephony." The Dialing Properties dialog box appears.

· Click the Telephony Drivers tab.

· Click "Natural MicroSystems service provider."

· Click "Remove."

· Click "OK" to close the Dialing Properties dialog box.

· In Control Console, double-click "Multimedia." The Multimedia Properties dialog box appears.

· Click the Devices tab.

· Expand "Sound devices."

· Click "Audio for Natural MicroSystems telephony hardware."

· Click "Remove.".Click "OK" to close the Multimedia Backdrop dialog box.

· When prompted to restart, click "Don't restart now."

· In Control Panel, double-click "Add together/remove programs."

· Click the Install/Uninstall tab.

· Select "Natural MicroSystems Natural Admission."

· Click "Add together/Remove."

· When all NMS components have been uninstalled, delete the NMS directory from the hard drive. By default it's in the root of C:\

· Proceeded with running the Unity Uninstall program.

Choosing a Linguistic communication Interface

This tool comes with congenital in back up for several languages including U.s. English language, French, German and Japanese. By default it will brandish the language the Windows operating system is set up for. If that linguistic communication is non supported it will default to Us English.

To manually strength the tool to show a different language than the default, you can select the Help | Almost bill of fare selection and click the "Change Language" hyperlink on the About box. The languages installed volition be presented in a driblet down list and the display will update into that language immediately when you select it.

Note : If you lot select Japanese every bit a display language and yous are not running on a version of Windows that has the Japanese code page installed, the display will show all "?" characters. This is expected.

Obtaining Updates

To check for updates to this tool, visit http://www.ciscounitytools.com

Revision History

4.0.34 – 1/4/2010

• CSCte01124 - IIS directories not removed on Unity uninstall.

four.0.33 – 8/three/2009

• CSCso99496 - Unity Uninstall fails to delete default objects & remove sub backdrop.

4.0.32 – 7/23/2009

• CSCta67329 - Unity Uninstall needs updated for switch from backup jobs to tasks in CU8.
• CSCta67408 - Unity Uninstall leaves some services installed.
• CSCsz05290 - Uninstall fails to remove the UnityDb.
• Remove Unity Connection Inter-op feeder virtual directories from IIS for 8.0.

4.0.31 – 4/3/2009

• Remove VMWS Virtual directories and VMWS application pools from IIS for viii.0(1).

4.0.30 – 2/15/2008

• Added CuDohMgr service to the shut downwardly and removal list for the vii.0(1) release.

four.0.29 – iv/23/2007

• CSCsi56173 - Remove orphen CuVrt service registry keys.
• CSCsi09672 - delete EAdmin account without problem.

4.0.28 – 2/two/2007

• Added CuMDBStoreMonitor service to the shut down and removal list for the 5.0(ane) release.

iv.0.27 – 12/26/2006

• Included the removal of AvWM*.dll files from the System32 folder. CSCsh23957.

4.0.26 – 10/5/2006

• Added CsVpimConnector service to the shut down and removal process for the 5.0(i) release.

4.0.25 – 9/15/2006

• Added CuMessageAginSvr service to the shut down and removal list for the Unity v.0(1) release.
• Added CuVrt service to the close down and removal list for Unity 5.0(ane).

4.0.23 – iv/14/2006

• Changed default for removing subscriber properties from directory objects to faux and introduced "quiz" for users to go through before allowing it to exist turned on.
• Updated about box info.

4.0.22 – 12/19/2005

• Removing uninstall of Crystal Reports – leaving information technology there does non impact a new install of Unity and makes fresh installs much easier.

four.0.21 – 10/12/2005

• Added support for uninstalling the Crystal Reports run time setup for the 4.2 product.

4.0.xx – 7/26/2005

• Stock-still small UI problem in output logs. CSCsb22284

4.0.19 - iv/eighteen/2005

• Added a condom check to be sure removing the registry branch doesn't get "stuck" when a process adds back keys into the branch during removal.
• Updated uninstall for upcoming 4.0(five) release
• Added check to make sure Unity is non installed in the root of a drive instead of a folder: CSCsa61630.
• Converted installation packet over to Install Shield

4.0.17 – 11/22/2004

• Added logic to unload and remove the CsBMsgConnector service which was added every bit part of the four.0(five) evolution effort.

4.0.16 – 7/1/2004

• Added logic to explicitly unregister all the phrase server DLLs for all languages that may be installed on the local server

Version 4.0.xv – 4/30/2004

• Added support for localized help files in Unity 4.0(4)
• Stock-still problem with service removal for Windows 2003
• Added logic to close down the HTTPFilter service for when SSL is installed.
• Stop SQL and SQL Server Amanuensis services to release holds on a couple Unity DLLs
• Added logic to stop the TAPISrv service before removing the commserver directory to release holds on some AV DLLs.
• Added logic to remove Commserver directory after boot automatically using "runOnce" registry key

Version 4.0.9 – 3/19/2004

• Added logic to uninstall the Remote Serviceability Kit if information technology's on the local organization
• Inverse the directory removal logic to note each sub directory under commserver beingness removed such that it's easier to rail down the cause of a failure to remove the main Commserver directory.

Version iv.0.five – 3/eight/2004

• Included distinguished name of distribution lists that are being removed from system in the output log.

Version iv.0.4 – two/27/2004

• Added removal of unitySIPStack.dll from the \system32 directory.

Version 4.0.2 – 2/17/2004

• Added removal of objects from directory during uninstall without using the DOH.
• Included stopping and removing the TDSProxyService for the 4.0(four) release

Version three.0.79 – 12/23/2003

• Updated to include stopping and removing the IP Fax service if it's installed and running

Version three.0.78 – 8/1/2003

• Updated version checking logic for 4.0(3) release

Version 3.0.77

• Added EMS service for shut down and removal
• Added Bellhop service for shut down and removal
• Added CUPID service for shut down and removal
• Fixed automatic version check part to handle cyberspace access bug better.

Version 3.0.76

• Arranged to run the Coffee uninstall script to remove the client group items such that it runs before the World wide web and IIS services are close down and so it completes properly.
• Fixed problem where AvNotifierMgr service was not being removed in Unity 4.0(3) and afterward.
• Added power to cheque for updated versions

Version three.0.74

• Fixed problem where Active Voice registry branch was not always removed entirely: CSCea51515.

Version 3.0.73

• Added more details to the "remove these objects" dialog that comes up at the end of the uninstall. It includes the bodily alias, display name and mail allonym of the objects that need to be removed from the directory.

Version iii.0.72

• Updated with localization files for Unity 4.0(ii) release

Version three.0.71

• Stock-still problem where CUICA shortcuts were not being removed from the desktop and startup program groups properly.
• Fixed problem where Tools Depot shortcut was not being removed from the desktop properly
• Now removes the Message Store Configuration Wizard from the add-remove programs applet.
• Fixed trouble with TSP uninstall timing out.
• Now uses the uninstall.js script to remove all the PCA web residue including from the "Add remove programs" applet. CSCea13815.

Version iii.0.seventy

• Fixed issues where the Domino directory monitor service was not being removed from the SCM panel. CSCdz72269

Version 3.0.69

• Updated to skip the removal of desktop icons entirely if the local system is running on a Japanese Os. The paths to the desktop locations where these are stored are not being returned correctly and at present there doesn't appear to be a work effectually. Those icons will need to be removed manually if desired, nonetheless they exercise not need to exist deleted to allow for a clean installation of Unity on that box. This addresses CSCdz49265

Version 3.0.68

• Fixed some issues with the Japanese localization

Version 3.0.67

• Added removal of CUICA.tmp and CUCA.tmp folders off of C drive during install for 4.ten
• Added removal of CUICA shortcut on desktop for 4.x
• Added some more diag output to the SubscriberKiller routine.

Version 3.0.66

• Stock-still problem where the backup devices were not being properly removed due to an ADO issue. CDCdz07633

Version 3.0.65

• Added specific check to see if the local system is a primary server in a failover configuration. If information technology is a large alarm dialog pops up tell you that there are steps that demand to be completed before you can continue.
• Changed exe name to UnityUnistall3xandUp.exe to avert confusion. Many folks were asking if it could uninstall 4.x also and information technology can. At that place is a separate 2.10 uninstall version and we needed to brand sure we kept that distinction in place.
• Inverse default program grouping to "Unity" instead of making it's own group.
• Updated help file

Version 3.0.64

• Updated localization files
• Updated assistance

Version 3.0.63

• Added shut downward and removal of SQLChangeWriter service.
• Added timer logic effectually the removal of the SkinnyTSP since information technology times out on occasion.

Version 3.0.61

• Added call to "uninstall.js" Java script for Unity 4.0

Version 3.0.threescore

• Added logic to shut downwardly and remove TomCat service for Unity 4.ten organisation uninstalls

Version 3.0.59

• Improved logic for handling files that cannot be deleted since they are currently in utilise. Some DLLs remain loaded fifty-fifty subsequently shutting down all services and in those cases where the delete fails, the file is renamed to *.one-time and noted in the log file

Version 3.0.58

• Made adjustments for the 3.1(3) SR one release where the Unity shutdown takes a really long time if you get out the message store monitor service running earlier you tell the gateway to shut down.

Version iii.0.55

• Updated to include shutting down the new AvMsgStoreMonitorSvr service added for the 3.i(five) release.

Version three.0.54

• Removed Tools Depot link from the desktop
• Made Cyberspace Stop commands during initial shutdown normal windows such that users tin can see which procedure is beingness stopped. Had a few sites that setup boosted dependencies in their services that tripped this process up and by doing this they can conspicuously see a message indicating they demand to act before the uninstall tin can proceed.
• Added data to help file about failover uninstall (CSCdx57250)

Version 3.0.53

• Added SkinnySetup.exe to the uninstall routine. This removes the TSP information if installed on the system.

Version 3.0.52

• Updated to support localization into French, Japanese and German versions.

Version three.0.l

• Inverse the KILL method of shutting downward Unity over to a series of Cyberspace Stop commands then the occasional issue with AvCsMgr non responding to KILL wont be an issue
• Added logic to manually unregister all DLLs under the commserver\Components and commserver\OrderedComs directories
• Updated to remove shares created past the failover configuration
• Added prep logic for localized version in the updated about box.

Version iii.0.41

• Cleaned up help file into new format
• Renamed "UnityUninstall30" to "UnityUninstall3x" so folks wouldn't stress about if it works with 3.one or not.
• Fixed to remove AvTrapConnectionHolder and AvTrapConnectionHolderSvr.exe from System32 if present (CSCdw26926)
• Fixed to remove fail over and synchronization services if nowadays (CSCdw53826)
• Fixed to remove AvAdMon service in all cases (CSCdw26870)

Version - 3.0.38

• Included removal of schedule backup jobs for UnityDB
• Added command line selection to skip desktop icons and program group by request ("/SkipDesktop")
• Included removal of "reports" share on hard bulldoze since it causes errors in the event log if you lot don't remove it.
• Stock-still trouble where virtual directories in IIS were non removed, but the files in them were.
• Added check to see if the IVC service is stopped before removing services. This was causing a problem in the field
• Added removal of Selsius audio commuter references from the registry since these showed upwards as errors in the event log if they weren't cleaned upward.

Version - 3.0.29

• Added instructions to help file for removing Dialogic files from Win2K vs NT 4.0
• Included UAMIS account in removal instructions
• Fixed problem with file registration on setup

Version - 3.0.24

• Updated to work with Unity 3.0
• Added "/SkipDesktop" control line selection to skip over removing the desktop icons.

Version - 1.1.205

• Stock-still trouble where AllSubscribers and UnaddressMessages DLs were beingness removed when there were other Unity servers nonetheless installed in the site.
• Fixed problem where no errors were reported even though several were in the output log

· Fixed problem where Unity 2.3.iv and two.3.half-dozen installs were throwing errors when removing public distribution lists

Version - 1.1.198

• Fixed problem with "/SkipDOH" option attempting to open the output log twice, resulting in a run fourth dimension error.

Version - 1.1.195

• Force Unity to shutdown prior to removing users. This solved a problem with the notifier getting cranky when removingusers out from under it.
• Allowed user to proceed with Uninstall even if Uninstall can't bind to Exchange using LDAP port. The simply affair I can't do in this condition is to remove the Unity folder itself from Exchange. Included instructions on how to remove that folder manually in the help file.
• Fixed cosmetic issue with the size of the "floating form" used by SubscriberKiller... text was getting chopped off.
• Included calls to the DoEvents routine such that the grade can pigment and answer to mouse events while uninstalling.
• Added more diagnostic information in and effectually the bind to Exchange via LDAP port.

Version - 1.i.160

• Change interact with user when we can't bind to Unity properly. If the system is Win2K a different fault message pops up and no longer barks at the user to install ADSI (which is, of form, on every Win2K system).
• Fixed problem with bogus error being reported when tryign to shut down a service that is already off line.
• Included control line option for skipping the DOH removal. /SKIPDOH volition jump all the way effectually the SubscriberKiller telephone call and volition not attempt to bind to Exchange and/or remove the Unity folder.

© 2007 Cisco Systems, Inc. -- Company Confidential

saundersevoichland99.blogspot.com

Source: http://www.ciscounitytools.com/Applications/Unity/UninstallUnity/Help/UnityUninstall3xandUp.HTM

Share this post